Question 1

We work with classic, boxy and oversized fit blocks from XS–3XL as standard, and can customize grading or measurements to align with your target market.

Accepted Answer

To keep your collections consistent, we maintain three core fit blocks for bomber jackets. The classic block has balanced rib heights and a regular body length; the boxy block is shorter in length with a broader shoulder and fuller sleeve; and the oversized block extends the body and drops the shoulder for a more relaxed, streetwear-oriented silhouette. Standard sizing runs from XS to 3XL, but we can develop custom grading rules based on your existing charts or on reference samples you send us. All blocks are tested for armhole mobility and rib recovery after washing, which is especially important for bomber jackets with heavier insulation or coated shells.

Question 2

We offer screen print, DTF, embroidery, appliqué and bonded logos, plus full private-label packs with woven labels, care labels, hangtags and barcodes matched to your brand.

Accepted Answer

Our bomber jacket programs are built for private label. You can choose from multiple branding techniques including screen printing, DTF and other heat transfers, embroidery, patches and bonded logos. For coated nylon shells we use low-temperature ink systems and always run test panels to check adhesion and cracking before approving bulk. Beyond visible logos, we can develop complete label packs: woven main labels, size tabs, care labels, swing tags and barcodes. Colors can be matched to your shell and rib tones to keep a unified brand look. We respect intellectual property and will only reproduce protected military insignia, squadron patches or registered trademarks when you provide valid authorization.

Question 3

We regularly make reversible bombers with dual-pull zippers and clean seam finishes, planning artwork so both sides look premium without logos showing through.

Accepted Answer

Reversible bomber and flight jackets are a standard part of our production. We use dual-pull zippers, neat internal seam finishes and carefully placed labels so that each side can function as the “main” outside face. Common colorways include classic sage with orange reverse or more fashion-driven black and neutral combinations.When planning the graphics, we map out screen prints, embroidery, appliqués and woven badges on both faces of the garment to prevent telegraphing and unwanted impressions. Fabric and insulation choices are also reviewed to avoid excessive bulk, so the jacket keeps a sharp silhouette whether your customer wears side A or side B.

Question 4

Yes. We combine quilted taffeta, down-alternative fill and lighter mesh/tricot linings to build bomber jackets for cold, mild or transitional seasons, including options with orange reverse lining.

Accepted Answer

We design the insulation package of each bomber jacket around your climate and retail positioning. For three-season wear we typically use quilted taffeta with fill weights in a practical GSM range, balancing warmth and mobility. For colder markets we can add down-alternative insulation to increase loft and thermal performance without feather leakage, while keeping the bomber profile clean.

Question 5

We offer flight satin, Taslan, ripstop and leather/PU shells with matched ribs, zippers and snaps, and test them for colorfastness and durability before bulk production.

Accepted Answer

For bomber jackets we normally work with four main shell categories: glossy nylon flight satin for classic MA-1 looks, Taslan or microfiber for a matte, streetwear-friendly surface, technical ripstop for a more outdoor or utility feel, and leather/PU for A-2-style jackets. Rib knit cuffs, hem and collar can be made in 1×1 or 2×2 constructions, with heights adjusted to control the silhouette (classic, boxy or cropped). Hardware sets include branded or YKK zippers, snaps, reversible pulls and optional storm flaps. Before approving any shell, we test for pilling, seam slippage, colorfastness and basic abrasion so your bomber jackets can handle real-world wear in your target markets.

Question 6

We cover MA-1, L-2B, A-2-inspired and fashion blouson bomber jackets, using ready size blocks or your tech pack to match your brand’s fit and styling.

Accepted Answer

Vanrd focuses on OEM bomber and flight jackets, including the classic MA-1 with utility sleeve pocket and ribbed trims, lightweight L-2B styles without heavy insulation, and A-2-inspired jackets with leather or PU shells for a heritage look. If you are building a more fashion-driven line, we can also develop cropped, boxy or elongated blouson silhouettes with paneling, color blocking or contrast ribs. You can either start from our existing pattern blocks or send your own tech pack; our team will fine-tune details such as pockets, ribs, collar shape and sleeve volume so the final bomber jacket feels on-brand and consistent across your collection.

FAQs

Are you looking for a reliable manufacturer of trendy men's fashion apparel?

Quick Links

Services

Resources

Call Us