Custom Tracksuits in White and Black with Hooded Jacket
| Share | |
|---|---|
| Categories | Nylon Tracksuits |
| Brand | VANRD |
| Product Specifications | VN2611 |
| Categories | Hooded Jacket and Shorts Set |
| Style | Sportswear / Running / Casual |
| Material | Nylon / composition to confirm |
| Color | White and Black / Custom Color |
| Key Details | Split Panel / Attached Hood / Short Trim |
| Closure | Full Zip / Elastic Waist |
| Fit | Regular Fit |
| Logo Methods | Print / Embroidery / Heat Transfer |
| Customization | Panel Height / Fabric / Fit / Trim |
| Labels | Woven Label / Care Label / Hangtag |
| MOQ | 100 pcs per style per color |
| Sample & Bulk Time | Sample 7-10 days / Bulk 25-35 days |
| Size Range | XS-3XL / Custom Size Chart |
| Application / Occasion | Training / Teamwear Collections |
Product Overview
A two piece set built on a hard horizontal split: the jacket is white above the chest and black below, and the shorts carry a white block on the outer hem. Both pieces are cut from a light nylon that folds softly rather than holding a crisp crease.
The jacket runs to the hip with a full zip and an attached hood, so it layers over a tee without adding bulk. Shorts sit mid thigh on an elastic waist, which keeps the set usable for running as well as for streetwear drops.
Where the white and black meet is the detail to approve first, because a seam moved by even a few millimetres changes the whole proportion. Split height, shell fabric and short trim can all be reset from your reference.
Key Highlights
Hard Colour Split
The white to black break runs level across the chest and is graded so it stays level on every size.
Hood and Zip Combo
An attached hood with a full front zip lets the jacket sit open or closed without distorting the split.
Short Block Detail
A white block on the outer short hem repeats the jacket contrast and visually anchors the pair.
Light Shell Handfeel
The nylon keeps a dry touch and packs down small, which suits warm weather training sets.
How is the horizontal colour split kept level in bulk?
The split is cut as two separate panels rather than printed, so the line follows the seam. Placement is marked from the chest line on the graded pattern, and the first bulk pieces are measured against the approved sample before the run continues.
Which parts of this set can your brand customize?
| Field | Development Options |
|---|---|
| Panel Split Height | Where white and black meet, set per size on the graded pattern |
| Shell Fabric | Nylon options with hand feel and sheen approved by swatch |
| Jacket & Short Fit | Body length, sleeve width, inseam and short leg opening |
| Trim & Hardware | Zip tape, drawcord, elastic width and contrast colours |
| Hood Construction | Single or double layer hood, drawcord and eyelet placement |
| Labels & Packing | Woven label, care label, hangtag and export packing |
How are samples developed before bulk production?
Tech Pack Review
Confirm the split line, short block size and target quantity.
Fabric & Trim
Match white and black shells so both read the same weight.
Fit Sample
Check jacket length and short rise on the intended model.
Panel Trial
Measure the split height on the assembled sample, not the pattern.
Bulk & Inspection
Cut, sew, measure the split and audit the short trim.
Product Details
Split Panel & Short Trim
The white and black are separate panels, so the join is measured on the garment rather than trusted to the pattern. Split height, short block size and hood seam are the three points checked on the pre-production sample before any fabric is cut.
- Split height measured per size
- Short block size and position
- Hood seam and drawcord placement
- Zip tape shade against black shell
Why Choose Us
FAQ
What is the minimum order for this set?
MOQ is 100 pieces per style per color for the jacket and shorts together. It does not drop for smaller colour runs, so a two colourway order starts at 200 pieces.
Can we move where the colour split sits?
Yes. Split height is a pattern variable and can be raised or lowered from your reference. It is re-graded per size so the line stays level on the largest size as well.
Can the shorts be replaced with a long pant?
Yes. The jacket pattern carries over unchanged and the bottom is developed as a separate draft. Rise, leg opening and ankle finish are then set from your own size chart.
Can we choose a different colour pair?
Any two shell colours can be paired, and the contrast block is matched to whichever tone you approve. Lab dips are submitted before bulk so both panels are judged together.
How does the white shell hold up over time?
White nylon is judged on shade retention, so the approved sample is washed at your market temperature and compared before bulk. Any change in appearance standard is agreed in writing first.
What is the sampling and bulk lead time?
Sampling takes 7-10 days after the split drawing and fabric are confirmed. Bulk runs 25-35 days from sample approval, with freight time quoted separately.
- 加载中···
- *Name
- *Phone
- *Title
- *Content