Custom Made Tracksuits in Black with Reflective Piping Joggers
| Share | |
|---|---|
| Categories | Fleece Tracksuits |
| Brand | VANRD |
| Product Specifications | VF2611 |
| Categories | Pullover Hoodie and Jogger Set |
| Style | Y2K / Techwear / Streetwear |
| Material | Fleece / composition to confirm |
| Color | Black with Reflective Piping / Custom Color |
| Key Details | Reflective Piping / Kangaroo Pocket / Cuffs |
| Closure | Pullover / Elastic Waist |
| Fit | Relaxed Fit / Tapered Leg |
| Logo Methods | Print / Embroidery / Reflective Print |
| Customization | Piping Path / Fabric / Fit / Labels |
| Labels | Woven Label / Care Label / Hangtag |
| MOQ | 100 pcs per style per color |
| Sample & Bulk Time | Sample 7-10 days / Bulk 25-35 days |
| Size Range | XS-3XL / Custom Size Chart |
| Application / Occasion | Streetwear / Lifestyle Collections |
Product Overview
These custom made tracksuits pair a black pullover hoodie with a tapered jogger, and both pieces carry heat-sealed reflective piping. The line starts at the hood seam, drops across the shoulder, curves around the sleeve, outlines the kangaroo pocket and repeats down the outer leg. White chest and thigh branding sit against the matte black ground.
A relaxed hoodie with dropped shoulders and ribbed cuffs holds volume without pulling at the armhole, while the jogger runs close through the thigh and gathers at the ankle. The set reads as one coordinated silhouette rather than two separate garments.
Piping width, the exact route across each panel, fabric weight, body length, pocket depth and branding method can all be reset from your tech pack or reference sample. Because the piping is applied after assembly, seam crossing points are confirmed on a sample rather than on paper.
Key Highlights
Reflective Piping Route
The continuous line is mapped across hood, shoulder, sleeve, pocket and leg before sampling, so placement repeats in bulk.
Pocket Outline Detail
The kangaroo pocket edge is traced in the same piping, so pocket depth and line path are fixed together.
Paired Fabric Weight
Hoodie and jogger are cut from one matched fleece lot so the set drapes and washes as a unit.
Branding Options
Chest and thigh marks can move to print, embroidery or woven patch, sized to your artwork.
How is the reflective piping aligned across the hoodie and jogger?
Piping is applied after each garment is assembled, so the route is set on a finished shell rather than a flat pattern. The hoodie and jogger are marked together against one placement drawing and checked as a pair on the same fit model. If the route shifts on one piece, the other is re-marked before cutting.
Which parts of this tracksuit can your brand customize?
| Field | Development Options |
|---|---|
| Fabric & Weight | Fleece or French terry, hand feel and weight approved by swatch |
| Hoodie Pattern | Body length, shoulder drop, hood volume, pocket depth, rib height |
| Jogger Pattern | Rise, thigh width, taper, cuff height, inseam length |
| Reflective Path | Line route, piping width, contrast zone and break points |
| Branding | Chest and thigh marks by print, embroidery, woven patch or reflective print |
| Labels & Packing | Woven label, care label, hangtag and export packing to your artwork |
How are samples developed before bulk production?
Tech Pack Review
Confirm the paired specs, piping route drawing and target quantity.
Fabric & Trim
Shortlist fleece and reflective tape against your wash requirement.
Fit Sample
Review hoodie volume and jogger taper on the intended fit model.
Piping Trial
Test adhesion, break points and finished measurements on the shell.
Bulk & Inspection
Cut, sew, apply piping, audit measurements and check the approved route.
Product Details
Piping, Fit & Branding
Open a sample and the first thing to check is where the piping crosses a seam. On this set the line breaks at the shoulder, the pocket edge and the cuff, so each break is a potential misalignment point. Those three joins are measured on the pre-production sample before bulk cutting begins.
- Piping width and line route per panel
- Hoodie length, drop shoulder and hood volume
- Jogger rise, taper and cuff height
- Chest and thigh branding by print or embroidery
Why Choose Us
FAQ
What is the minimum order for this tracksuit?
MOQ is 100 pieces per style per color, and the same minimum applies to the hoodie and jogger as one set. The 100-piece figure holds for every order.
Can you develop the fit from our size chart?
Yes. Pattern and grading follow your approved size specification, and a fit sample is reviewed on the intended model before bulk. Two revision rounds are included in the sampling stage.
Will the reflective piping survive repeated washing?
Adhesion depends on the tape specification, so wash behaviour is tested on the sample at the temperature your market requires. The approved sample then becomes the reference for bulk acceptance.
Can the reflective line be changed or removed?
The route, width and contrast can all be redrawn from your reference, or the piping can be dropped on one piece only. Any change is re-marked on both garments before cutting.
How do you keep the hoodie and jogger the same black?
Both pieces are cut from one approved fabric lot, and shade is checked under the same light source. For repeat orders the original lot reference is kept for matching.
What is the sampling and bulk lead time?
Sampling takes 7-10 days after artwork and fabric are confirmed. Bulk production runs 25-35 days after sample approval, with freight time quoted separately.
- 加载中···
- *Name
- *Phone
- *Title
- *Content