Custom Windbreaker Jacket with Camo Panels and White Body
| Share | |
|---|---|
| Categories | Windbreaker Jacket |
| Brand | VANRD |
| Product Specifications | VO2611 |
| Categories | Windbreaker Jacket / Hooded Shell Jacket |
| Style | Streetwear / Outdoor / Utility |
| Material | Nylon / composition to confirm |
| Color | White and Woodland Camo / Custom Color |
| Key Details | Camo Shoulders / White Front / Neon Zip Pull |
| Closure | Full Zip Front |
| Fit | Relaxed Fit |
| Logo Methods | Print / Embroidery / Woven Patch |
| Customization | Panel Layout / Color / Zip Colour / Fit |
| Labels | Woven Label / Care Label / Hangtag |
| MOQ | 100 pcs per style per color |
| Sample & Bulk Time | Sample 7-10 days / Bulk 25-35 days |
| Size Range | XS-3XL / Custom Size Chart |
| Application / Occasion | Streetwear / Outdoor Collections |
Product Overview
This custom windbreaker jacket sets a white crinkle nylon front against woodland camo panels that run over both shoulders and down the upper sleeves. A black full zip runs to the hood, finished with a neon yellow pull that reads against the white body.
The cut is relaxed through the chest with a raglan sleeve, so the shoulder seam sits away from the joint and the arm lifts without pulling the front panel. Elastic cuffs and a drawcord hem close the openings without adding bulk at the waist.
How far the camo travels toward the front, the zip pull colour and the hem drawcord can all be reset from your reference. Shell weight and the level of crinkle are confirmed on the sample before bulk.
Key Highlights
Camo Panel Placement
Shoulder and sleeve panels are cut to your artwork so the camo edge follows the seam line.
White Nylon Front
Front body is set in a lighter crinkle nylon that keeps the camo panels visually separate.
Zip and Pull Options
Zip tape, teeth finish and pull colour can be matched to your hardware reference.
Hem and Cuff Fit
Elastic cuff tension and drawcord hem are tuned on the sample for your target fit.
Product Details
Panel Split, Shell Weight & Trim
The camo split line and the shell weight are developed together, because a heavier nylon changes how the panels sit on the shoulder. Zip hardware, cuff tension and hem drawcord are locked on the approved sample before cutting starts.
- Camo panel edge matched to artwork
- Shell weight and crinkle level options
- Zip pull and tape colour matching
- Elastic cuff and hem drawcord tension
Why Choose Us
FAQ
Q: Can camo and white bodies be ordered in different ratios?
A: Colourways can be split inside one order. The 100-piece minimum per style per color applies to each colourway, so a custom windbreaker jacket in two camo options starts at 100 pieces each.
Q: When can we see a printed camo sample?
A: About 10-12 days, because the camo is printed on the shell before cutting. Bulk runs 25-35 days once the panel registration and shell weight are approved.
Q: Does the white nylon front show dirt at the hem and cuffs?
A: It is the most exposed panel, so we recommend a soil release finish on the front body. The finish is tested on the sample and does not change the crinkle handfeel.
Q: Can the neon zip pull be swapped for a standard pull?
A: Yes. Pull shape, colour and metal finish are all open, and the zip tape can be matched to either the white body or the camo panel.
- 加载中···
- *Name
- *Phone
- *Title
- *Content